Titan TTB591ROU, Инструкция по безопасности и эксплуатации

Страница: 17 / 20

ROUTER 1250W TTB591ROU
The cutter of your router rotates clockwise.
For more efficient cutting, move your router from left
to right as you stand facing the workpiece.
noTE: When cutting outside edges, move your router
anticlockwise and clockwise when cutting inside edges.
MAINTENANCE
Remove battery from the tool and the plug
from the socket before carrying out any
adjustment, servicing or maintenance.
Your power tool requires no additional lubrication or
maintenance. There are no user serviceable parts
in your power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean with
a dry cloth. Always store your power tool in a dry
place. Keep the motor ventilation slots clean. Keep
all working controls free of dust. Occasionally you
may see sparks through the ventilation slots. This is
normal.
if the supply cord of the charger is damaged, it must
be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
REPLaCinG THE CaRBon BRUSH (See Fig.
13)
if you suspect that the brush may be worn or as a
purely precautionary measure, it can be removed
and inspected and replaced if required. Firstly
remove the cap over the brush housing with a
screwdriver. You can now remove the old carbon
brush. Slide the new brush into the housing and
relocate the cap and secure. Once the brush has
been replaced check and confirm that the router still
operates.
Allow the unit to run for a few minutes to enable the
new brushes to ‘bed’ down.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice. For
further information visit www.recyclemore.co.uk
Fig. 13