background image

ROUTER 1250W 

TTB591ROU

GUARANTEE

This  

TiTan 

product carries a guarantee of 2 years. If your product develops a 

fault within this period, you should in the first instance contact the retailer where the 

item was purchased. 

This guarantee specifically excludes losses caused due to:

- Fair wear and tear

- Misuse or abuse

- Lack of routine maintenance

- Failure of consumable items (such as batteries)

- Accidental damage

- Cosmetic damage

- Failure to follow manufacturer’s guidelines

- Loss of use of the goods

This guarantee does not affect your statutory rights. This guarantee is only valid in the 

UK.

For any enquiries relating to the guarantee please refer to your retailer.

Congratulations on your purchase of a power tool from 

TiTan

 Power 

Tools (UK) Ltd. We want you to continue getting the best performance 

from it so this handbook includes information on safety, handling and 

care. Please retain this handbook in case you need to refer to any of the 

information in the future.

Your 

TiTan 

power tool comes with a 2 year guarantee, so should it 

develop a fault within this period contact your retailer.

Содержание TTB591ROU





















Отзывы: