Titan TM45FG, Руководство по эксплуатации

Страница: 17 / 31

(3)
Adjustment of cross table backlash and wear compensation
a.
The wedge installed on the cross slide to adjust backlash of
table and perform wear compensation.
b.
When backlash is big, clock wise turning the bolt on the cross
slide and when backlash is small adjust a little on the contrary.。
c.
The screw for adjusting wedge make the table lightly.
MACHINE OPERATION
(1)
DRILLING
a.
To pull the feed operation handle when drilling, tapping,
reaming may rapidly move down the spindle. Draw the handle
to the right auto feed can be realized. Three feed capacity were
designed for customer’s selection. When need to control drilling
depth, loose the fixed handle of dial first , adjust dial to the
required depth then tighten up the fix handle you may start
drilling. When drilling to the controlled depth the operation
handle will return back automatically and the spindle will return
to the original position also.
b.
When need manual feed, draw the feed control handle to
the left and tighten up the limit handle to limit right drawing of
the feed handle.
c.
Machine can perform tapping according to the customer’s
request.