Titan TM45FG, Руководство по эксплуатации

Страница: 16 / 31

lubricant. There is an oil cup on the worm gear, oiling twice every
shift.
(3)
To make the machine operating more flexible ,oil film
should be formed on the spindle sleeve and the surface of
c
olumn
to prevent rust and stop dust.
(4)
The return spring should be lubricated once a year.
(5)
Column, cross table and ball screw should be oiling every
operation.
(6)
Lubricate oil should be added to the oil marks of gear box
before operating and oil in gear box should be changed once a
year.
MACHINE ADJUSTMENT
(1)
Up and down adjustment of spindle box. To loose the lock
handle on the right side of vertical slide and turn the handle on the
left side of knee may realize up and down movement of spindle box
along the
c
olumn. When it reaches the working height tightly lock
the right side handle.
(2)
The worm gear in the spindle auto feed structure and the
clutch housing have been adjusted to the best position when
machine dispatched. Elasticity of spring would be changed after a
period of time using, adjust the spring pressure properly at the
time.