© Titan Tool. All rights reserved.
5
1. Use the allen wrench provided, attach the mounting
bracket (1) to the power pack (2) with the 2.4mm
lockwashers (3) and socket head screws (4).
2. Place the power pack/mounting bracket assembly on any
1” diameter tube, preferably as illustrated below.
3. Align support clamps (5) with mounting bracket (1), using
the other allen wrench provided, attach the 2 pieces with
the 4-1/4” lockwashers (6) and socket head screws (7),
tightening down equally on both sides.
Typical mounting arrangement - airless Sprayer
Figure 3
1
2
3
4
5
6
7
