Titan SF290E, Инструкция по безопасности и эксплуатации

Страница: 13 / 15

1/2 SHEET SANDER SF290E
PLUG FITTING
The fuse in the main plug of your power tool
should always be replaced with one of identical
rating.
Check the voltage given on your power tool
matches the supply voltage.
The power tool is supplied with a fitted plug,
however if you should need to fit a new plug
follows the instruction below.
IMPORTANT
The wire in the mains lead are coloured in
accordance with the following code:
Blue ---Neutral
Brown ---Live
The wire that is coloured
blue
must be connected
to the terminal that is marked with the letter
N.
The
wire that is coloured
brown
must be connected
to the terminal that is marked with the letter
L.
A 13AMP (BS1363 or BS1363/A) plug must be
used and a 5 AMP fuse must be fitted.
5 AMP
FUSE
BROWN
L (LIVE)
BLUE
N (NEUTRAL)
OUTER
SLEEVE CABLE GRIP