Titan SF290E, Инструкция по безопасности и эксплуатации

Страница: 12 / 15

5. If you see some sparks flashing in the
ventilation slots, this is normal and will not
damage your power tool.
6. If the supply cord is damaged, it must be
replaced by a special cord or assembly available
from the manufacturer or its service agent.
TROUBLESHOOTING
1. If your sander will not operate, check the power
at the mains plug.
2. If the sander does not abrade surface, check
the sand paper. If the sand paper is worn ,
replace with new paper .The paper must be kept
in a dry place, if it is allowed to become damp,
the abrasive particles will lose their adhesion to
the backing paper and will not abrade.
3. If the sander does not move smoothly, The
sanding paper may be loose, damaged or
wrinkled. Replace and try again.
4. If a fault can not be rectified return the sander
to an authorised dealer for repair.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your Local Authority or retailer for recycling
advice.