Titan PGD2875H, Руководство оператора

Страница: 8 / 22

6
Adding Engine Oil
1.
Before the first use, add engine oil. THE OIL IS NOT FILLED WHEN THE POST DRIVER IS
ASSEMBLED . Honda suggests adding less than 80 cm
2
(2.7 US oz., 2.8 Imp. oz.), then checking.
Add oil if required to fill to the bottom edge of the oil fill hole. Use 10W-30 oil. DO NOT OVERFILL.
Always
place the driver in the horizontal position
to check oil
the
level. Proper oil level is essential for
the correct operation of the post driver. Overfilling the oil will result in loss of power and could cause
permanent damage to your engine.
2.
To avoid damage to the engine, always check the engine oil before starting the driver. Be sure the
engine oil level is adequate.
3.
For every 10 hours of use, it is necessary to check the oil level.
4.
To check the oil, place the
driver
horizontally. Unscrew the oil level gauge, and check the oil level as
shown below. If the oil level is low, add oil. If the oil is dirty, change the oil.
The recommended environmental temperature range of the machine is 5° to 105° F. We recommend the use
of SAE 10W-30 engine oil, which equals to API classification SJ.
See SAE Engine Oil Consistency Table below.
Checking the Air Filter
1. Remove the air filter cover, and check to see if the air filter is clean. If it is dirty, clean it.
2. After checking the air filter, reinstall the air filter cover.
Upper Limit
Upper Limit
Oil Filler
Minimum
Oil Level Gauge
SAE Engine Oil Viscosity Grade
Environmental Temperature