background image

2

 

Introduction 

Thank you for choosing Titan Gas-Powered Post Drivers. The performance of this machine is dependent 
upon your knowledge of the information contained in this operator’s manual and your understanding of the 
operation and care of the engine installed on your Titan Post Driver.  

This post driver is powered by a Honda GX35 engine. Honda supplies its own operator’s manual, which 
covers all aspects of operating and maintaining your Honda engine. The Honda manual is provided to you 
along with this Titan Post Drivers operator’s manual. Keep both manuals with your machine for reference by 
all operators. Follow all recommended maintenance for both the Titan Post Driver and the Honda engine.  

Your Titan Post Driver comes with a one-year limited manufacturer’s warranty (see warranty terms on Page 
1

7

 of this manual). We suggest that you read the warranty information and fully understand its coverage and 

your responsibilities of ownership. To register your Titan Post Driver, simply fill out and return the warranty 
registration card enclosed with your machine. 

The Honda warranty is separate from the Titan Post Drivers warranty and is subject to its own coverage 
conditions and responsibilities of ownership. You can find the Honda warranty included with your Honda 
operator’s manual.  

Please contact Titan Post Drivers at

 (702) 293-4262

 for parts or technical questions related to your post 

driver warranty. Please contact your local Honda service dealer for parts or technical questions related to 
your engine.  

Titan PGD2875H Post Driver 

Содержание PGD2875H























Отзывы: