EN
19
In
more
detail...
TTB926STM
by TITAN
Operation / Care and maintenance
EN
6. Keep working along the strip of wallpaper until it can be completely removed
from the wall.
7. Repeat above steps until all wallpaper strips have been removed from the
walls.
NOTE:
The product is not designed for continuous use. Disconnect it
from the power supply and let it rest for 15 minutes after each hour of
running.
The max volume of water is sufficient for
80
minutes of use. Check the
water level regularly during use and ensure it does not reach below the
MIN marking. Add water if necessary (See “Filling with water”).
After use
1. Disconnect the product from the power supply to switch it off, unplug the
power cord from the product and let it cool down.
2. Check, clean and store the product as described below.
The golden rules for care
WARNING!
Always disconnect the product from the power supply and
let the product cool down before performing inspection, maintenance
and cleaning work!
1. Keep the product clean. Remove debris from it after each use and before
storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of
the product.
3. Inspect the product before each use for worn and damaged parts. Do not
operate it if you find broken and worn parts.
WARNING!
Only perform repairs and maintenance work according to
these instructions! All further works must be performed by a qualified
specialist!
General cleaning
1. Clean the product with a dry cloth. Use a brush for areas that are hard to
reach.
MNL_TTB926STM_2200W Wallpaper Stripper_GB_V8_220623.indd 19
MNL_TTB926STM_2200W Wallpaper Stripper_GB_V8_220623.indd 19
2022/6/23 下午5:04
2022/6/23 下午5:04
