TTB926STM
by TITAN
Getting
started...
EN
14
Connection to power supply
1. Ensure the water level in the
water tank (4) is located between
the MIN and MAX markings.
2. Insert the power adaptor of the
power cord (6) into the water
tank socket (4b) (Fig. 9). Ensure
they are properly engaged.
3. Connect the plug of power cord
(6) to a suitable mains socket.
4
4b
Fig. 9
WARNING!
Check the voltage! The voltage must comply with the
information on the rating label!
Always use a residual current device (RCD) protected supply.
NOTE:
This unit will automatically begin the boiling process when
power is switched on at the mains socket.
4. Your product is now ready to be used.
NOTE:
During preheat time, do not leave the steam plate (3) facing
down and always place it in a suitable container (bucket/trough).
Escaping steam could damage surfaces.
Never leave the product unattended while it is connected to the power
supply or cooling down. Keep children and pets at safe distance.
Before you start
6
MNL_TTB926STM_2200W Wallpaper Stripper_GB_V8_220623.indd 14
MNL_TTB926STM_2200W Wallpaper Stripper_GB_V8_220623.indd 14
2022/6/23 下午5:04
2022/6/23 下午5:04