Tisira tIs90b, Руководство пользователя

Страница: 23 / 28

pg 23 tisira | www.tisira.com www.tisira.com
HINTS AND TIPS
Problem PossIble caUses WHat to do
The induction hob
cannot be turned on.
No power. Make sure the induction hob is connected
to the power supply and that it is switched
on. Check whether there is a power outage
in your home or area. If you’ve checked
everything and the problem persists, call a
qualified technician.
The touch controls are
unresponsive.
The controls are locked. Unlock the controls. See section ‘Using
your induction cooktop’ for instructions.
The touch controls are
difficult to operate.
There may be a slight film of water
over the controls or you may be using
the tip of your finger when touching
the controls.
Make sure the touch control area is dry
and use the ball of your finger when
touching the controls.
The glass is being
scratched.
Rough-edged cookware.
Unsuitable, abrasive scourer or cleaning
products being used.
Use cookware with flat and smooth bases.
See ‘Choosing the right cookware’.
See ‘Care and cleaning’.
Some pans make crackling
or clicking noises.
This may be caused by the construction
of your cookware. (layers of different
metals vibrating differently)
This is normal for cookware and does not
indicate a fault.
The induction hob
makes a low humming
noise when used on a
high heat setting.
This is caused by the technology
of induction cooking.
This is normal, but the noise should
quieten down or disappear completely
when you decrease the heat setting.
Fan noise coming from
the induction hob.
A cooling fan built into your induction
hob has come on to prevent the
electronics from overheating. It may
continue to run even after you’ve
turned the induction hob off.
This is normal and needs no action. Do
not switch the power to the induction hob
off at the wall while the fan is running.
Pans do not become
hot and
appears in the
display.
The induction hob cannot detect the
pan because it is not suitable for
induction cooking.
The induction hob cannot detect the pan
because it is too small for the cooking
zone or not properly centred on it.
Use cookware suitable for induction
cooking. See section ‘Choosing the right
cookware’.
Centre the pan and make sure that its base
matches the size of the cooking zone.
The induction hob or a
cooking zone has turned
itself off unexpectedly,
a tone sounds and an
error code is displayed
(typically alternating with
one or two digits in the
cooking timer display).
Technical fault. Please note down the error letters
and numbers, switch the power to the
induction hob off at the wall, and contact
a qualified technician.
troUblesHootInG