Tisira tIs90b, Руководство пользователя

Страница: 22 / 28

pg 22
www.tisira.com | tisira www.tisira.com
InstallatIon
BEFORE YOU INSTALL THE HOB, MAKE SURE THAT
The work surface is square and level, and no structural members interfere with space requirements
The work surface is made of a heat-resistant material
If the hob is installed above an oven, the oven has a built-in cooling fan
The installation will comply with all clearance requirements and applicable standards and regulations
A suitable isolating switch providing full disconnection from the mains power supply is incorporated in
the permanent wiring, mounted and positioned to comply with the local wiring rules and regulations.
The isolating switch must be of an approved type and provide a 3 mm air gap contact separation in
all poles (or in all active [phase] conductors if the local wiring rules allow for this variation of the
requirements)
The isolating switch will be easily accessible to the customer with the hob installed
You consult local building authorities and by-laws if in doubt regarding installation
You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall surfaces
surrounding the hob.
WHEN YOU HAVE INSTALLED THE HOB, MAKE SURE THAT
The power supply cable is not accessible through cupboard doors or drawers
There is adequate flow of fresh air from outside the cabinetry to the base of the hob
If the hob is installed above a drawer or cupboard space, a thermal protection barrier is installed
below the base of the hob
The isolating switch is easily accessible by the customer
BEFORE LOCATING THE FIXING BRACKETS
The unit should be placed on a stable, smooth surface (use the packaging).
ADJUSTING THE BRACKET POSITION
Fix the hob to the work surface by screwing 4 brackets on the bottom
of the hob after installation.
Adjust the bracket position to suit for different bench top thicknesses.
CAUTIONS
1. The induction hotplate must be installed by qualified personnel or technicians. We have professionals
at your service. Please never conduct the operation by yourself.
2. The hob will not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes
dryer, as the humidity may damage the hob electronics
3. The induction hotplate shall be installed with adequate ventilation to ensure its reliability.
4. The wall and induced heating zone above the bench surface shall withstand heat.
5. To avoid any damage, adhesive and sealant must be resistant to heat.