Tisira tIs90b, Руководство пользователя

Страница: 20 / 28

pg 20
www.tisira.com | tisira www.tisira.com
electrIcal
connectIon
CONNECTING THE HOB TO THE MAINS POWER SUPPLY
This hob must be connected to the mains power supply only by a suitably qualified person. Before
connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate.
3. The power supply cable sections can withstand the load specified on the rating plate.
4. To connect the hob to the mains power supply, do not use adapters, reducers, or
branching devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75°C at any point.
CAUTION // Check with an electrician whether the domestic wiring system is
suitable without alterations.
Any alterations must only be made by a qualified
electrician.
IMPORTANT // The power supply should be connected in compliance with
the relevant standard, or a single-pole circuit breaker. The method of
connection is shown below:
If the cable is damaged or to be replaced, the operation must be carried
out by an authorised service agent.
If the appliance is being connected directly to the mains an omnipolar
circuit-breaker must be installed with a minimum opening of 3mm
between contacts.
The installer must ensure that the correct electrical connection has
been made and that it is compliant with safety regulations.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by authorised
technicians only.
ELECTRICAL SHOCK HAZARD
Disconnect the appliance from the mains electricity supply before
carrying out any work or maintenance on it.
Connection to a good earth wiring system is essential and mandatory.
Failure to follow this advice may result in electrical shock or death.
2 X 230V 2l+2n~
400V 2n~
220-240V~
2 X 230V 2l+2n~