16
Inserting the name plate on the base station
Fig. 12
Please label the fields on the plate with the names of the people, whose call
numbers you want to store under the respective speed dialling keys. Then
insert the plate into the recess.
Attach the plastic cover: Slide the cover into the top fixing (see Fig. 13), bend
it slightly and then guide it into the bottom fixing.
Fig. 13
Removing the plastic cover and the strip: Insert an appropriate implement
(e.g. an open paper clip) into the bottom centre groove and carefully push up
the cover / plate until you can get hold of it.
Setting up the telephone
57
OK
Press the OK key.
Base PIN
Enter the 4-digit PIN (default setting 0000).
For other manufacturers base stations, the
PIN can have 8 digits.
Press the Paging key on the base station until
you can hear a sequence of tones. Then
release the key. The sequence of tones lasts
around 30 seconds. The handset can be
registered during this time.
OK
Press the OK key on the handset.
The handset begins to search for the base
station. After it has found it, all available
handset numbers appear in the display.
e.g. 2
Enter the desired handset number using the
number key.
After a few seconds, the handset goes into
idle mode.
Registering other manufacturers handsets
You can register other manufacturers handsets on your base station.
However, to do this the relevant handset must support the GAP standard.
Consult the manual for the handset you want to register for details of how to
register it on a GAP base station.
You prepare your base station for registration as follows:
Press the Paging key on the base station until
you can hear a sequence of tones. Then
release the key. The sequence of tones lasts
Customising the handset
