31
Loudspeaker, ringing tone and earpiece settings
On the handset
Loudspeaker Volume
Setting the loudspeaker volume (levels 1-5) in the telephones idle mode:
MENU
Press the Menu key.
Choose Select 3 using the arrow key.
Select 3
Handset Tone Press the Select 3 key.
Select 1
Speaker Vol. Press the Select 1 key.
e.g. 2:
The current volume level is displayed. Select
the desired level using the arrow or number
key.
OK
Press the OK key.
Select further settings. Or
Press the R key to leave that menu level.
Setting the loudspeaker volume (levels 1-5) during a call:
Hands free is turned on.
e.g. 2:
The current volume level is displayed. Select
the desired level using the arrow keys.
The volume is adjusted immediately.
Remark:
If you change the volume during a call, the change is only valid for the
duration of that call.
42
Emergency call mode
OK
Press the OK key.
Select further settings. Or
Press the R key to leave that menu level.
Duration of active connection
The Duration of active connection is the time, in which the emergency
number is dialled, the telephone called and the S.O.S. tone sequence played
back. Example: The telephones default setting is 90 seconds. The S.O.S.
tone sequence is played for this entire time (although it can only be heard
when the call is accepted). If a recipient answers the call after 60 seconds, he
will hear the S.O.S. tone sequence for a maximum of another 30 seconds.
You can set a duration from 30 99 seconds. Do not select too short a
duration, so that the tone sequence will still be heard, if there is a delay in the
handset of the telephone called being lifted.
MENU
Press the Menu key.
Choose Select 5 using the arrow key.
Select 5
Emergen Call Press the Select 5 key.
Enter PIN
Enter the 4-digit PIN.
OK
Press the OK key.
Choose Select 5 using the arrow key.
Select 5
Duration
Press the Select 5 key.
e.g. 90
The set duration is displayed. Delete figures
using the right display key. Enter the desired
duration (30 99 seconds) using the number
keys.
OK
Press the OK key.
Select further settings. Or
Press the R key to leave that menu level.