Planning and installation
58
Tools and material needed
•
Hammer drill with 6 mm stone drill for wall mounting
In case you wish to use the screwing terminals:
•
Screwdrivers of different size
•
Wire cutter, cable stripper
•
Telephone installation cable (e.g. I-Y(ST)Y 2 x 2 x 0,6)
in needed
quantity and length
•
Telephone jacks/wall outlets
•
Miscellaneous mounting material for cables and telephone jacks
Define the mounting location
The telephone system can be either operated horizontally or vertically, mounted to a
wall.
Please consider the following requirements for the location:
•
All items listed in chapter 'Safety notes' (see page 54) on the intended
operation and use of the telephone system have to be observed.
•
Make sure that you are close to a mains power wall outlet.
•
Make sure that you are close to the connection access for the external
telephone lines from your telephone company.
•
Make sure to chose a central location regarding the planned locations
of your extensions.
Extensions close to the telephone system can be connected directly to the system by
using the system's western jacks. You should then use ports 1 through 4. Extensions
not that close to the system should be connected via separately installed cables
connected to the screwing terminals of the telephone system.
Opening the cabinet
In case you need to make use of the screwing terminals of the telephone system you
will have to open the cabinet first. You will also have to open the cabinet in case you
wish to install the optional door module TSM1.
Before opening the cabinet make sure to disconnect mains power and the external
telephone lines.
