Page 7
5
Activating the Sensor
Remove the sensor from packaging
Recycle the power on the modem and it will enter the “Learn mode” for
two minutes. Hold the black dots of the modem and the black dot on
the sensor together.
All 3 LED’s will flash while the transmitter is matching to the receiver.
Once the matching process is complete the green LED will light up for 5
seconds and will no longer be flashing.
The unit will not immediately try to connect to the server and then
revert to the listen mode.
Also consult the online video:
6 Fitting the Sensor
For tanks with pre-drilled 32mm holes:
Remove cap from pre-drilled hole and insert transmitter, ensuring the
weather seal is securely in place and that the sensor sits vertically.
Tighten onto the tank with the supplied 2 stainless steel self-tapping
screws provided. Do not use longer screws or over tighten.
For tanks with a 2”, 1½” or 1¼” BSP/NPT gauge aperture
(60mm/48mm/42mm):
