Page 10
If the transmitter sensor serial number is already known and is already active,
the number may be typed in using the “Type in sensor serial” option.
It is however more typical to use the “Activate Sensor” option.
When the “Activate Sensor” option is selected and the “Next” button is clicked,
the Broadband modem is set to the “Learn Mode” and the screen below is
shown.
A magnet needs to be held to the Transmitter Sensor (at the black dot), or the
sensor is held to the black dot of the Broadband Modem.
Follow the instructions on the screen and hold the sensor next to the broadband
modem.
If the process is not started within 2 minutes, the activation persiod will
expire and the process must be restarted.
