Page 5
6: File download failed
7: RF self-test failed
Amber +
Green
LED’s On solid indicate unit is
attempting to connect to the server.
Amber + Green double flash
to indicate a successful
connection to the server.
Amber +
Green +
Red
All three LED’s on solid indicate the
unit is powering up. If this does not
clear, please contact support.
Indicates a sensor is being
activated (and matched if
sensor matching is enabled).
3 Installing the Broadband Modem
Please unpack the broadband modem from the packaging and screw the
antenna onto the unit, if it is not already pre-installed.
The Ethernet port (right hand of the picture) must be connected to your internet
high speed connection router. No additional bridges or routers are required. The
modem should have “line of sight” to the tank sensor transmitter and should not
exceed 250ft of distance.
Please note that the distance will decrease with obstacles such as walls or glass
between the modem and the transmitter.
The Ethernet-cable delivered is approximately 1m/3ft long, but a longer cable of
up to 100m/328ft can be used.
The left plug in the picture above is for the power supply, which is also delivered
in the packaging.
Upon correct installation and activation the green LED light in the corner of the
Ethernet plug will blink. If this light remains off, the connection to the Router is
faulty.
