Timex IronmanW-276, Руководство пользователя

Страница: 17 / 207

17
When the GPS, Heart Rate and/or Foot Pod sensors are active, the watch keeps track of the following data in
Timer mode and reports it in Review Mode:
gPs heart rate (hr) sensor foot Pod sensor
Calorie Expenditure • • •
Calories per repetition • • •
Average speed • •
Average speed per repetition • •
Maximum speed • •
Average pace • •
Average pace per repetition • •
Minimum (or best) pace • •
Distance • •
Distance per repetition • •
Elevation •
Elevation per repetition •
Maximum altitude •
Minimum altitude •
Total ascent •
Total descent •
Amount of time the user’s heart rate
was within the heart rate zones
•
Minimum heart rate •
Average heart rate •
Average heart rate per interval •
Peak heart rate •
HR within a HR target zone per interval •
Average cadence •
Average cadence per interval •
Maximum foot cadence •
ConfIgure The TIMer
Set the length of the timer, what happens when the timer runs out, and whether or not to alert you at the
halfway mark. You can also customize the display in Timer mode.
seT The TIMer
1. Press MODE until TIMER displays.
2. Press SET.
3. Press DOWN to select TIME, and then press SELECT.
4. Press UP or DOWN to change the blinking value, and then press NEXT to move to the next value.
5. Press DONE.
seT TIMeouT aCTIon
You can set the timer to start the CHRONO mode when it runs out. You can also set it to STOP, or to REPEAT
until you stop it manually.
1. From TIMER mode, press SET.
2. Press DOWN to select AT END, and then press SELECT.
3. Press UP or DOWN to select CHRONO, REPEAT, or STOP, and then press SELECT.
4. Press DONE.
seT halfwaY alerT
You can set the timer to sound an alert when half of the set time is expended.
1. From TIMER mode, press SET.
2. Press DOWN to select HALFWAY, and then press SELECT.