11
12
• The First “OFF” time for day 1 can now be
programmed by using the Hrs and Mins buttons.
• Press the Set button briefly and the display will
show
and the programme 2 “ON” time
can be entered as for programme 1.
Note: Pauses of 15 seconds or more during
programming will result in an automatic return
to the operating condition.
• Programming the module for day 1 should continue
in this way up to programme eight if so desired.
Note: It is not necessary to enter all eight programmes
available to you on this day, those not required
should be left blank
(––:––)
. You can also day omit
by not programming any ON/OFF times on the day
you require no switching on the unit.
6d Setting Programmes – Day 2, 3 etc.
• If the display still shows a day 1 “ON” or “OFF”
programme press the Day button and the day
indicator will move above day 2. If, instead, the
display shows the clock time with the colon
flashing press the Set button and hold down for
about 3 seconds until the display shows the first
programme “ON” time for day 1.