manualshive.com logo in svg

Timeguard ELU56, Инструкция по установке и эксплуатации, Страница: 13 / 16

Поделиться
Скачать
Timeguard ELU56 Скачать руководство пользователя страница 13

12

13

•  Press the Day button again briefly and the day 

indicator will move above day 2. In either case the 
display will change to 

 with a flashing 1  

(indicating programme 1 on day 2) appearing 
underneath the “ON” indicator. 

•  The required programmes can now be set for day 

2 in the same way as for day 1. Days 3 to 7 can be 
programmed in the same way as for days 1 and 2. 

•  Once the programming is complete press the Set 

button and hold down for about 3 seconds until 
the display returns to the correct time of day 
with the colon flashing. The module is now in its 
operating condition. 

6e Suspending programmes

•  Press and hold down the Set button for about  

3 seconds until the first “ON” programme,  
day 1 is displayed. 

•  Press the Day button repeatedly until the day 

indicator points to the day on which you wish  
to suspend the ON/OFF time. 

•  Press the Set button repeatedly until the “ON”  

or “OFF” time of the programme you wish to 
suspend is displayed. 

Содержание ELU56

















Отзывы:

Нет отзывов