Timberwolf TW 280TVGTR Скачать руководство пользователя

Страница: 72 / 117

29 / 73

DECALS

C190-0176

01.03.2019

Rev: 2.0

Warning.

Hot exhaust

Danger.

Rotating blades.

Keep hands and feet out.

Warning.

High velocity discharge -

keep clear

Reverse feed

Personal Protective

Equipment required.

See page 5.

Forward feed

Read the instruction manual

for greasing and

maintenance information.

Warning. Do not engage starter

motor for more than 20 seconds.

Allow one minute before

attempting to start. Investigate

reasons for failure to start.

Excessive cranking will result in

starter motor failure. This will

not be covered under warranty.

The instruction manual with

this machine contains

important operating,

maintenance and health and

safety information. Failure

to follow the information

contained in the instruction

manual may lead to death or

serious injury.

Lifting eye is designed to lift the

machine’s weight only.

Do not

use hoist hook directly on lifting

eye. Use correctly rated safety

shackle only through lifting eye.

Lifting eye to be inspected every

6 months or before each use.

Always visually inspect lifting eye

prior to each use. Do not use

lifting eye if damaged.

Push safety bar to stop.

Do not pull here.

Clean under blades before

refitting or turning. Failure to do

so may result in blade(s) coming

loose and damage being caused

to the rotor housing.

Fuel Here.

Risk of fire. Allow engine to

cool for 1 minute before

refuelling.

Use diesel fuel only.

New drive belts need re-

tensioning.

When new belts are fitted check
tension every 2-3 hours & adjust

until tension remains constant.

Torque blade bolts to 125 lbs ft

(170 Nm).

Danger.

Rotating blades.

Keep hands and feet out.

Danger.

Do not climb into the feed funnel.

DECAL

DESCRIPTION

616

617

670

1661

1662

4099

2800

2949

3022

1399

P*691

19517

18393

2801

When the engine stop

button is pressed it must

be pulled out again and

the ignition switch turned

oﬀ to reset the machine

before attempting to

restart.

C192-0105

P1812

C192-0112

DECAL

DESCRIPTION

TW 280TVGTR

P3611

C192-0102

Содержание TW 280TVGTR






















































































































Результаты поиска

Содержание TW 280TVGTR

Отзывы:

Похожие инструкции для TW 280TVGTR

Бренды по названию

Популярные бренды

Timberwolf TW 280TVGTR, Инструкция по эксплуатации

Результаты поиска

Содержание TW 280TVGTR

Отзывы:

Похожие инструкции для TW 280TVGTR

Бренды по названию

Популярные бренды