Timberwolf TW 280TVGTR Скачать руководство пользователя

Страница: 73 / 117

TW 280TVGTR

30 / 73

DECALS

C190-0176

01.03.2019

Rev: 2.0

Danger.

Do not operate without this

cover in place.

Danger.

Rotating blades inside.

Stop engine and remove key

before removing discharge unit.

Caution.

Do not put road sweepings in

machine as grit will damage

blades.

Caution.

When transporting, discharge

clamps may work loose. Check

frequently.

Caution.

Avoid standing directly in front of

feed funnel to reduce exposure

to noise, dust and risk from

ejected particles.

Danger.

Do not use this machine without

the discharge unit fitted. Failure

to comply may result in serious

injury or damage.

Maximum lift weight.

Danger.

Autofeed system fitted. Rollers

may turn without warning! When

the engine is switched off the

rollers will turn during the run

down period.

Appropriate

supports must be used while

servicing the jacking legs.

Danger

Never position any part of your body

under the machine. serious injury

may occur.

Close bucket and point discharge

away from driving position.

Protective equipment must be

worn when driving machine.

To go on relays.

Forward Latch

Engine Safety

Track/chip relay

Warning.

Ensure the tracks are clear of

obstructions when using the

variable grade Wolftrack

chassis.

P637

P652

P655

P653

P654

P656

P650

DECAL

DESCRIPTION

DECAL

DESCRIPTION

Aeq

1810

P1811

18653

118

18648

18647

C192-0152

C192-0145

C192-0101 C192-0100 18008 1363 C192-0148

C192-0182

C192-0146

C192-0141

C192-0142

Содержание TW 280TVGTR






















































































































Результаты поиска

Содержание TW 280TVGTR

Отзывы:

Похожие инструкции для TW 280TVGTR

Бренды по названию

Популярные бренды

Timberwolf TW 280TVGTR, Инструкция по эксплуатации

Результаты поиска

Содержание TW 280TVGTR

Отзывы:

Похожие инструкции для TW 280TVGTR

Бренды по названию

Популярные бренды