Timberwolf Economizer EPA 2300, Инструкция по установке и эксплуатации

Страница: 26 / 72

W415-1473 / 04.22.15
EN
26
8.5 GLASS REPLACEMENT
!
WARNING
DO NOT USE SUBSTITUTE MATERIALS.
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
CARE MUST BE TAKEN WHEN REMOVING AND DISPOSING OF ANY BROKEN DOOR GLASS OR
DAMAGED COMPONENTS. BE SURE TO VACUUM UP ANY BROKEN GLASS FROM INSIDE THE
APPLIANCE BEFORE OPERATION.
DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS
REMOVED, CRACKED, BROKEN OR SCRATCHED.
56.2
A. When the appliance is cool, remove
the door and place it face down on
a soft surface. Be careful not to
scratch the paint.
B. Remove the 5 screws securing the
glass retainers. Remove all broken
glass.
C. Cut the
3
/
4
” (19mm) fl at gasket
into 3
1
/
2
” (89mm) lengths and affi x
to glass retainers as illustrated,
ensure the gasket extends past the
ends of the retainers by
1
/
4
” (6mm).
D. Apply small beads of silicone in the
gasket groove, as shown.
E. Place the rope gasket in the gasket
groove, on top of the silicone.
F. Place the glass on the door. Re-
install the glass retainers.
¾” x 3 ½”
(19.1mm) x (88.9mm)
FLAT GASKET
¼” (6.4mm)
ROPE GLASS GASKET
SILICONE