Timberk THU UL 32 E (BU), Инструкция по эксплуатации

Страница: 15 / 20

IM2020
15
Automatic switching off when there is no water
When water level in the tank drops below minimal level, the ultrasonic membrane will automatically switch
off, a beep will sound and button on the control panel will light red. To continue operation of the appliance it
is necessary to fill the
tank with water according to «Filling the water tank» paragraph, and then connect the
appliance to the electric mains.
Air aromatization
The device is equipped with an aroma capsule for aromatic oil, located near the ventilation hole, at the base
of the device. When aromatic oil is added to it, air aromatization occurs. Aromatic oil is not included in the
delivery set.
ATTENTION!
Do not overfill the aroma capsule with aromatic oil. Presence of aromatic oil on the plastic elements of the
device can lead to the malfunction and is considered by the manufacturer as not a warranty case.
Switching off
To turn off the device, press the control button several times, the button should not be lit, and unplug the
device from the power supply.
THU UL 32 E (W)
THU UL 32 E (W) operation
1. Turning on
Install the appliance vertically on a flat and dry surface, fill the tank with water then connect the device to the
power line. Press the POWER button to turn on the device. The screen will glow brighter, steam flow at
startup is set by default to high speed. To turn off the appliance, press the POWER button again. Each
touch is accompanied by a sound signal .
At the very beginning of this operation, the spray level may be unstable due to temperature differences and
water quality. It will take a short period of time for this process to stabilize.
2. Steam outlet intensity control
In order to change the steam output intensity, press the button.
The numbers 1/2/3 will be displayed on the screen:
1 - low steam speed;
2 - medium steam speed;
3 - high speed steam speed.