Timberk THU UL 32 E (BU), Инструкция по эксплуатации

Страница: 14 / 20

IM2020
14

Do not hit or throw the water tank. It may get damaged resulting in water leaks. Do not use the unit in
case if the water tank is heavily hit. Immediately contact the technical support service or the
maintenance and repair station.

Every day fill the tank with fresh filtered water and keep the unit clean.
8. OPERATION OF THE DEVICE
Control panels
THU UL 32 E (BU)
THU UL 32 E (BU) operation
1. The button is used to turn on / off the device and select the operating mode. It has the following operation
algorithm, shown in table 2.
On/Off Control Button color
One press High intensity Blue
Two presses Medium intensity Green
Three presses Low intensity Orange
Four presses Auto mode (automatically
adjusted depending on humidity
level, turns off when 65% is
reached) Blue
– green – orange (repetitive)
Five presses Off -
Hold for 3 seconds Backlight On/Off
Switching on
Install the appliance vertically on a flat and dry surface, fill the tank with water then connect the device to the
power line. Press the control button.
The device will turn on with a high steam output, the button will light blue
and steam will start coming from the atomizer. At the very beginning of operation, the atomizing level may
appear unstable, which is caused by the temperature difference and water quality. It will take a short period
time for this process to stabilize.
ATTENTION!
If a large amount of condensate is generated on the upper part of the appliance when it is operating, then
you need to decrease the steam outlet intensity.
Adjusting steam outlet intensity
In order to change the steam output intensity, press the control button several times, the steam output
intensity will change: off, high, medium, low, automatic mode, while the button will glow in different colors.
Comfortable conditions are reached at 40 to 60% relative air humidity. You can yourself determine the
comfortable humidity level or use a special device called a hygrometer (not included in the set), measuring
the relative humidity level.
Auto mode
In this mode, automatic intelligent humidity control is carried out. The device stops working when humidity
reaches 65%; resumes operation after humidity drops below 65%.
Backlight of the device
When this function is turned on, the backlight of the device lights up at the bottom of the base, while the
colors change alternately. Press and hold the control button for 3 seconds to turn on the backlight.
Press and hold the control button for 3 seconds to turn off the backlight.