Timberk TCH A3 1000, Инструкция по эксплуатации

Страница: 3 / 20

www.timberk.com • electric ceiling heater
3
3. WORKING PARAMETERS
12. It is prohibited to use the heater in rooms with explosive, dusty, or
corrosive environment.
13. Exclude operation of the heater without grounding.
14. It is prohibited to switch on and use the heater with removed cover.
15. It is prohibited to install and use the heater in bathrooms, showers, or
near swimming pools, where water jets and drops may directly get onto the
appliance surface, when it is switched on.
16. It is prohibited to use the heater in dusty rooms and during redecoration.
17. It is prohibited to touch the heater radiating boards.
18. Use the heater only as described in this Manual. Any other use not
recommended by the manufacturer may lead to fire, electric shock, or
injuries of people.
19. Never clean the heater, when it is connected to the electric mains, and
do not wipe the heater radiating boards with flammable liquids during its
operation.
20. For normal operation of the heater, the mains voltage should be
sufficient and the mains specifications should strictly correspond to the
technical parameters indicated on the appliance body. If necessary, clarify
the specifications of your mains from the electricity supplier.
21. Install and operate the heater on the ceiling constructions and on the
wall. At that, thermal resistance of the ceiling coating material should be
at least 80 0 C.
22. It is prohibited to install the appliance in immediate proximity to an
electric socket. This may result in its overheating causing an emergency
situation.
23. The appliance is not designed for use by people (including children)
with limited physical, sensory, or mental capabilities and having insufficient
experience/knowledge, if they are not supervised and instructed on use of
the device by a person responsible for their safety. It is necessary to watch
that children do not play with the heater.
24. There can be sticked an advert stickers on the heating plates. It should
be removed from the surface before first start of the device.
25. There is a warning sticker on the reverse side of the device. It is strongly
do not recommended to remove it. You can do this, only if you want to
attach the remote control block. (Remote Control Block is not included in
the standard set of heater; you can buy it separately).
Operation principle
The infrared heater is an appliance with an open electric heating element
that gives heat when heated in the environment by generating directional
infrared radiation. Radiant energy absorbed by the surrounding surfaces
and turning into thermal energy heats them . The temperature on
the surface of objects may be different depending on their properties
termoabsorbtsionnyh (numbers surface material) , the angle of incidence of
infrared rays , the shape and surface area. Surface is also given to some of
the heat the air, while heated air rising to the ceiling, gradually cools down,
while at the head of a standing person on the air temperature is 1-2 ° C
below the temperature of the floor.
Main features
1. Significant economic effect as compared to convectional heating, where
heat is significantly consumed for heating of unused roof space (first, air
is heated throughout the room volume, and then air heats objects and
surfaces in the room).
2. Capability of local heating only for those areas in the room, where it is
necessary, without heating of the whole room volume.
3. Low air temperature in the room at comfortable temperature on surfaces
of objects, floor, and walls creates the freshness effect air is not dried up.
4. Low convection (thermal movement of air volumes) reduces amount of
dust kicked up from the floor.
5. Absence of the burnt air effect contrary to heaters with high temperature
of the work surface.
6. You can buy & install additionally the following: Block of Remote
Control together with Remote Control Handheld. Remote Control
Block can switch on/off the heater and also use timer settings.
Using Remote Control, you will get more options than simple
ceiling heater can provide like base function set.
Area of application
Infrared heaters are designed for general, additional, and local heating
of industrial, production, utility, and similar rooms (flats, offices, trade
enterprises, exercise rooms, educational institutions, public catering
enterprises, storage facilities, hangars, agricultural facilities, etc.).
When these heaters are used in day-care services they can be used only
for additional heating.