Timberk TCH A3 1000, Инструкция по эксплуатации

Страница: 5 / 20

www.timberk.com • electric ceiling heater
5
1. Heater body
2. Protective grille
3. Heating element
4. Cover
1. Infrared heater - 1 pc
2. Set of fasteners - 1 pc
3. Operation manual - 1 pc
4. Warranty certificate - 1 pc
4. INFRARED HEATER DESCRIPTION
5. DELIVERY SET
Fig.2
1. Open the factory package and carefully remove the heater from it.
2. Take the set of fasteners.
3. Select the heater installation place on the ceiling or ceiling structural
elements with observation of minimum distances from objects and
minimum distance from the floor.
4. Install the brackets at distance from each other, securing them using a
chain or fasteners (fig. 3).
5. Suspend the heater on the brackets according to Fig. 3, first securing on
edge, then another. Make sure that screws are tightened firmly.
Infrared heater mounting
6. INSTALLATION
NOTE:
To improve the product quality, the design and
technical specifications of the infrared heater, as well
as its delivery set can be modified by the manufacturer
without preliminary notification.
WARNING!
Mounting of the infrared heater and its connection to the
electric mains should be carried out only by qualified
specialists according to the Electrical Installation
Regulations and Power System Safety Standards.
Fig.3
1
2
4
3