Timberk TCH A3 1000, Инструкция по эксплуатации

Страница: 7 / 20

www.timberk.com • electric ceiling heater
7
Possible malfunctions and remedies for them:
If you are not able to remedy a malfunction according to the recommendations
or other malfunctions occur, contact the authorized service center of Timberk.
10. TROUBLESHOOTING
NOTE:
Radiating boards should be wiped with a soft rag
moistened in alcohol leaving no scratches on the
surface. Use of other liquids is prohibited!
Malfunction Cause Remedy
1. The heater heats poorly
1. The heating element is faulty
1. Contact the authorized service center
of Timberk
2. Low voltage in the electric mains 2. Check voltage in the electric mains
2. The heater does not work
1. No voltage in the electric mains
1. Check presence of voltage in the
electric mains
2. Breakdown of the electric cable
2. Check integrity of the electric cable and
replace it if necessary
3. The automatic circuit breaker of the
electric mains is faulty
3. Check operability of the automatic circuit
breaker of the electric mains and replace
the faulty circuit breaker if necessary
4. Breakdown in the heating element circuit
4. Contact the authorized service center
of Timberk
9. TRANSPORTATIOM AND STORAGE
Temperature
requirements*
Humidity
requirements*
We are exploring new technologies and we constantly improving the quality
of our products. That’s why specifications, design and accessories are
subject to change without any specific notice.
Transportation and
storage
From -30° to +50°
From 15% to 85%
(without a condensate)
11. WIRING SCHEMATIC DIAGRAM
12. DISPOSAL
Fig.4
Upon completion of the service life, the infrared heater should be disposed
according to the effective local regulations, rules, and methods. For more
details on disposal of the infrared heater, please contact a representative
of the local authority.
~220 V