CAROBNA HYDRO
3
/
20
WARNING BEFORE USE
To keep your stove working properly, it is important to read this manual and strictly stick to the
instructions for use and handling.
For combustion use solid fuels such as wood and wood briquettes. It is forbidden putting explosive devices
and materials combustion chamber or the limited thermal furnace. It is forbidden to keep flammable
materials near the stove.
For proper combustion, in normal operating mode, draft in the chimney should be 12-15PA. If the draft is
greater than 17Pa, the valve should be installed in the chimney.
Room where the stove is positioned must be vented regularly for the fresh air needed for combustion.
Some parts of stove heat up during operation and it takes appropriate precaution when handling it. Do not
allow children to handle and play near the stove.
Only spare parts recommended and allowed by the manufacturer should be installed on the stove. You
must not make any changes on the stove.
With first firing there might show a mild smoke, especially from the plate’s surface. It is a common
appearance that occurs due to combustion deposits on the plate’s surface(corrosion protection, paint,
dust, ....). The room where the stove is should be vented during the first firing.
It’s not recommended connecting the stove to the common chimney because it can adversely affect the
required draft.
Device that uses gas as fuel must not be connected to same chimney.
During firing, use protection gloves because the door handles get heated.
National and local regulations for the installation of the furnace must be respected.
In a case of non-compliance with instructions given in this manual, manufacturer does not take any kind of
responsibility for caused damage.
