CAROBNA HYDRO
4
/
20
DESCRIPTION OF STOVE
Wood burning stove CAROBNA HYDRO is manufactured and tested according to European standard EN
13240. Figure 1 shows the layout of the stove with integral parts essential for handling.
Wood burning stove CAROBNA HYDRO has a boiler (fig. 1, pos. 11) capacity of 10l, which is made of boiler
plate thickness prescribed standards. Such preparation increases the working life of the boiler. Connections
for water are 1“.
The upper plate of the fireplace is made of steel. (fig. 1, pos. 1)
Firebox doors (fig. 1, pos. 6) are made of steel with fireproof glass.
Connection for smoke drains being put on the plate and connected with screws. (fig. 1, pos 2.). and are made
of cast iron
All the materials that CAROBNA HYDRO stove is made can be recycled.
Sealing elements are made of materials that NOT contain asbestos.
The grid in the combustion chamber (fig. 1, pos. 8) is made of cast iron.
Integral parts of the stove:
1 –Upper (hot) plate
2 – Smoke exhaust
3 – Secondary air regulator
4 – Secondary air
5 – Door handle
6 – Fire door feat resistant glass
7 – Grid carrier
8 – Grid
9 – Primary air regulator
10 - Ash pan
11 - Boiler
Fig. 1. integral parts of the stove CAROBNA HYDRO
