TILLOTSON TPP-4500G-A, Руководство пользователя

Страница: 7 / 30

7
IMPROPER CONNECTIONS TO A BUILDING CAN ALLOW
ELECTRICAL CURRENT TO BACK FEED INTO UTILITY LINES,
CREATING AN ELECTROCUTION HAZARD.
•
CONNECTIONS TO A BUILDING MUST ISOLATE THE
GENERATOR POWER FROM UTILITY POWER AND COMPLY
WITH ALL APPLICABLE LAWS AND ELECTRICAL CODES.
•
All connections and conduits from the generator to the load must only be
installed by trained and licensed electricians, and in compliance with all
relevant local, state, and federal electrical codes and standards, and other
regulations where applicable.
•
The generator must be earth-grounded for fixed installations in
accordance with all relevant electrical codes and standards before
operation.
THE GENERATOR IS A POTENTIAL SOURCE OF ELECTRICAL
SHOCK IF NOT KEPT DRY.
•
DO NOT EXPOSE THE GENERATOR TO MOISTURE, RAIN OR
SNOW. Water entering a generator will increase the risk of electric
shock.
•
DO NOT OPERATE THE GENERATOR WITH WET HANDS.
•
Do not attempt to connect or disconnect load connections while standing
in water, or on wet or soggy ground.
•
Do not touch electrically energized parts of the generator and
interconnecting cables or conductors with any part of the body, or with
any non-insulated conductive object.
•
Keep all electrical equipment clean and dry. Replace any wiring where
the insulation is cracked, cut abraded or otherwise degraded. Replace
terminals that are worn, discolored, or corroded. Keep terminals clean
and tight.
Power Output
This generator is not designed to power sensitive electronic equipment (such
as computers, mobile phones, medical devices and the like) without the
addition of an approved line conditioner, which is sold separately.
ATTEMPTING TO POWER SENSITIVE ELECTRONIC
EQUIPMENT WITHOUT THE USE OF AN APPROVED LINE
CONDITIONER MAY CAUSE DAMAGE TO THE EQUIPMENT.
NEITHER TILLOTSON POWER PRODUCTS LLC NOR ANY OF ITS
AFFILIATES ARE RESPONSIBLE FOR ANY DIRECT OR
INDIRECT DAMAGE CAUSED BY FAILURE TO USE AN
APPROVED LINE CONDITIONER.
Work Area