|
7
DE
EN
CZ
SK
■
NOT TO BE USED in an outside environment.
■
NOT TO BE USED for any other purpose than it was designed for.
■
Do not touch the power cord with wet hands or if you’re in a water.
■
This package contains small parts that may be hazardous for children. Always keep this product out of reach of children. The bags
may cause suffocation when put over the head or the small parts they contain may cause choking.
This appliance is designed only for domestic use and similar premises such as:
■
Staff kitchens in shops, offices and other work premises
■
Hotel or motel rooms and other living areas
■
Guest houses or similar areas
product Layout
1. Lid
2. Spout
3. Open Lid button
4. Handle
5. Base
6. + Button
7. - Button
8. LCD Display
9. KEEP WARM Button
10. ON/OFF Button
3
4
1
2
5
8
6
9
7
10
Before Initial Use
Before initial use, remove any packaging and stickers, boil with the maximum water capacity (1.7 l) in the kettle three times, but do
not drink this water. This will remove any impurities occurring in the manufacturing process or during transportation.
TIp:
Use a vinegar solution to descale.
Use
1. Turn the kettle so its spout is turned away from you.
2. Open the lid by pressing button on its handle.
3. Fill the kettle with water (min. 0.5 l, max. 1.7 l). Never exceed the “MAX” level indicator as hot water may splash out of kettle. Pay
attention to keep the base dry.
4. Close the lid.
5. Place the kettle on its base and ensure that the lid is closed tightly. Plug it into the socket, the LCD display will flash and will display
the current water temperature in the kettle. The kettle is now in the standby mode.
You may use one of the following functions:
a. ON/OFF Button
By pressing the button, the kettle will turn on and display the temperature of 100°C. Set the required temperature by using
the + and - buttons. In 5 minutes, kettle will start to heat up the water and the display will show the current temperature.
b. KEEP WARM – if you press this button after choosing the set temperature, the kettle will keep the temperature for 2 hours.
PL
HU
