TIGIEFFE Airo X Series, Руководство по эксплуатации и обслуживанию

Страница: 8 / 124

Use and Maintenance Manual - X Series Page 8
All types of machine use other than those for which it was designed must be approved in writing by the machine manufacturer
following a specific request on the part of the user.
Do not use the machine for purposes other than those for which it was designed, except after making a
request and having obtained written permission in this sense from the manufacturer.
1.4 Description of the machine
The machine described in this use and maintenance manual is a Mobile Elevating Work Platform equipped with:
 Motorized chassis equipped with wheels
 Vertical scissor lifting structure operated by one or more hydraulic cylinders (the number of cylinders varies according to
machine model)
 Operator platform with manual slide-out extension deck (the max. capacity varies according to the model - see chapter
"
Technical features ")
The chassis is motorised to allow the machine to move ( see "Use instructions”) and has two rear idle wheels and two front driving
and steering wheels. The rear wheels are equipped with hydraulic parking brakes, positive logic type (when drive controls are
released brakes are automatically activated).
The hydraulic cylinders which move the articulated structure are provided with electric safety valves directly flanged on the same.
These devices allow the arms to remain in position even if one of the supply tubes accidentally breaks.
The platform, which can be manually extended from the front side, is equipped with guard rails and toe-boards of a prescribed
height (the height of the guard rails is 1100 mm; the height of the toe-boards is 150 mm, the entrance area has a toe-board of at
least 100 mm).
When no motive power is available, the manual emergency lowering can be controlled enabling the knob manually from the ground
(see instructions plates).
The allowed capacity on the platform does not change depending on the position of the extension deck.
1.5 Control panels
The machine is equipped with two control panels:
 on the platform for normal use of the machine
 on the chassis you can find: the emergency controls to lower or stop the platform and the emergency stop button, a key-
selector to select the control panel and to start the machine.
1.6 Drive power
The machines are powered by an electro-hydraulic system consisting of rechargeable accumulators and electric pump.
Both the hydraulic and the electric systems are equipped with all necessary protections (see electric and hydraulic circuit diagrams
annexed to this manual).