TIGIEFFE Airo X Series, Руководство по эксплуатации и обслуживанию

Страница: 50 / 124

Use and Maintenance Manual - X Series Page 50
7.2 Machine cleaning
To clean the machine use non-pressurized water jets after properly protecting the following parts:

the control panels (both platform and ground)

all electric boxes and electric devices in general

the electric motors.
Do not use pressurized water jets (e.g. high-pressure cleaners) to clean the machine.
After washing the machine, always:
 Dry the machine.
 Check integrity of plates and stickers.

Lubricate the articulated joints equipped with greaser and the sliding ways.
7.3 General maintenance
Below are listed the main maintenance jobs to be done and the relevant schedule (the machine features an hour meter).
OPERATION FREQUENCY
Screw tightening (paragraph "Various adjustments”)
After the first 10 working
hours
Oil level check in hydraulic tank
After the first 10 working
hours
Battery state (charge and liquid level) Every day
Deformation of tubes and cables Every month
Stickers and code plates Every month
Articulated joints / sliding blocks greasing Every month
Oil level check in hydraulic tank Every month
Emergency devices efficiency check Every year
Electric connections check Every year
Hydraulic connections check Every year
Periodic operation check and structure visual check Every year
Screw tightening (paragraph "Various adjustments”) Every year
Pressure relief valve calibration check Every year
Lifting circuit pressure relief valve calibration check Every year
Braking valve efficiency check Every year
Inclinometer operation check Every year
Platform overload controller operation check Every year
M1 Microswitch operation check Every year
MPT1 and MPT2 Microswitches operation check Every year
Dead-man switch check efficiency Every year
Total oil change in hydraulic tank Every two years
Hydraulic filter replacement Every two years
IT IS NECESSARY
TO SEND THE MACHINE TO THE MANUFACTURER WITHIN 10 YEARS OF WORK
FOR A COMPLETE CHECK.