TigerStop TigerScan, Руководство по установке

Страница: 4 / 18

DANGER: This machine can start, move and stop automatically. Keep hands and loose clothing
clear of moving parts while operating. Moving parts can crush and cut. When used with a saw or
other cutting equipment, bodily injury and death may result if operated without safety guards on
all machines. Do not operate with guards removed. Operators must wear adequate eye and ear
protection. High voltage DANGER - Do not open motor compartment or controller keypad. No user
serviceable parts inside.
(TigerStop Quick Reference Card, ALSO label of motor end plate or amplifier cover)
DANGER! CAUTION! Keep hands and loose clothing clear of moving parts while operating. Moving parts can crush
and cut. To comply with ANSI Safety Standard B11-19 paragraph 4.2.1, “The user shall be responsible for ensuring that
safeguarding is provided, integrated, installed, maintained and used in accordance with the requirements of this standard.”
When used with saws or other cutting equipment, bodily injury and death may result if operated without safety guards on
all machines. Do not operate with guards removed. Keep the work area clean and well-lit to avoid accidental injury. Do not
use TigerStop in a dangerous environment. Using power tools in wet locations or in rain can cause shock or electrocution!
Do not operate near flammable liquids or in gaseous or explosive atmospheres! Wear proper apparel, no loose clothes or
jewelry which could get pulled into moving machinery or materials. Wear non slip footwear, safety glasses, ear protection
and a dust mask. Do NOT operate this machinery under the influence of drugs or alcohol! POWER: Use only 3-wire
extension cords, 3-prong grounded plugs and 3-pole receptacles. No one should operate this machine except fully
qualified personnel. Read the TigerStop Manual for complete instructions. HIGH VOLTAGE DANGER: Do not open motor
compartment or controller keypad. DC voltage with potentially FATAL amperage! Disconnect power before servicing.
(Label covering motor box or amplifier end cap)
CAUTION: The springs are loaded! Do not loosen the clamp at the back end of the buffer tubes without taking
precautions. Sudden release of spring tension could result in bodily injury.
(Spring Buffer Heavy Duty)
IMPORTANT CAUTIONS - READ AND UNDERSTAND BEFORE OPERATING TIGERSTOP MACHINES!
DANGER! Don’t get pinched by the push feeder. Keep your hands away when in motion!
Keep the work area clean and well lit to avoid accidental injury.
Do not use TigerStop machines in a dangerous environment. Using power tools in damp or wet
locations or in rain can cause shock or electrocution.
Do not operate near flammable liquids or in gaseous or explosive atmospheres!
Wear proper apparel, no loose clothes or jewelry which could get pulled into moving machinery or
materials.
Wear non slip footwear, safety glasses, ear protection and a dust mask.
Use only 3- wire extension cords that have 3-prong grounding type plugs and 3-pole receptacles that
accept the tools plug for 110VAC. Use only 5-wire cords and plugs when using 3 phase.
DO NOT operate this or any machine under the influence of drugs or alcohol!
Do not open motor compartment or controller keypad. DC Voltage with potentially FATAL amperage!
Disconnect power before servicing.
No one should operate this machine except for fully qualified personnel.
Read the manual!