TigerStop TigerScan, Руководство по установке

Страница: 13 / 18

Using the TigerScan System
Using the TigerScan System
The TigerScan laser defecting system changes the way you cut lists with your TigerStop. Once installed,
using the system is a 3 step process;
1. Enter and Run a Pusher List.
2. Scan your stock material.
3. Load TigerStop and cut your material.
Enter and Run a Pusher List
1. Start at the Ready Screen. Press the [Show] soft key to display more
options.
2. Press the [List] soft key to access the list interface.
3. Enter the list number you wish to program and press the [Edit] soft key.
Note: The list number is a memory location where the list will live. You can choose list
number 1-100.
4. At the ‘Select Type’ screen, press the [Pusher] soft key.
5. At the ‘Select Opt’ screen, press the [Yes] soft key.
Note: The list type must be set to Optimized. The TigerScan defecting laser will not acti-
vate for a Non-Optimized list.
6. Select if you want to use a global or a local head and tail cut.
Note: Head and tail cuts are trim cuts at the beginning and end of your stock material. It
is used to eliminate defects and square up the end of the material.
Global
- Uses the head and tail cut setting from the parts list menu as your head and tail
cut values.
Local
- Allows you to set a custom head and tail cut that is used for this list only.
7. You will now be taken to the programming screen for line 1. Enter the
length of the part you wish to process and press .
Note: In this example I will tell TigerStop to cut a 24 inch part.