TigerStop TigerFence SLR, Руководство по установке

Страница: 19 / 32

19
4. At the Menu Select screen, press the [PartList] soft key to access the
Part List menu.
5. Press to scroll through the settings until you get to the Opt Score
setting.
The Optimizer Score setting sets the score that the optimizer solution must reach to be considered a
good solution.
A lower Opt Score setting will give you a better optimized solution, but will take longer to do so.
A higher Opt Score setting will give you a faster solution, but it may give you a lower material yield.
To change Opt Score...
1. Enter the new Opt Score setting.
2. Press to save the parameter.
6. Press to scroll through the settings until you get to the Opt Time
setting.
The Optimizer Time setting sets the amount of time the TigerStop Optimizer has to find a solution. If it
takes longer than this time, TigerStop will use the best found optimized solution.
A lower Opt Time setting will give you a faster solution, but it may give you a lower material yield.
A higher Opt Time setting will give you better material yield, but it may take longer to do so.
To change Opt Time...
1. Enter the new Opt Time setting.
2. Press to save the parameter.
7. Press to scroll through the settings until you get to the Opt Pen
setting.
The Optimizer Penalty setting sets a penalty for multiple board optimized solutions. This means that the
higher this setting, the more TigerFence will try to Rip wider parts first.
A lower Opt Pen setting will give you faster optimization with more short parts processed first.
A higher Opt Pen setting will give you a slower optimization with more long parts processed first.
To change Opt Pen...
1. Enter the new Opt Pen setting.
2. Press to save the parameter.
By adjusting these three optimizer settings, you can greatly influence how the TigerStop optimizer works
to suit your exact application.