5
4. Install/Exchange a Hard Drive
Follow the instructions below to install or exchange a hard drive.
A) Use a screwdriver to open the box.
B) Remove the top cover.
C) Compare the hard drive with the mounting holes on the bottom cover.
D) Connect to power and SATA cable to the hard drive while paying
attention to the orientation of the HDD.
E) Carefully place the hard drive to match the mounting holes on the
bottom of box or the side box.
F) Secure HDD to bottom cover with screws from bottom or side.
5. Power on the DVR and monitor
A) Plug the power adapter for the DVR into a power source.
B) Power on the monitor.
C) Connect the mouse to the USB slot on the DVR back panel.
D) You will see TIGERSECU LOGO in a few seconds, then the Start-up wizard.
E) The Start-up wizard will guide you through the basic settings.
* You may search “How
to install a DVR
?” on YouTube for more instructions.
Installation Guide
