19
2. Video Loss
Use
Trigger Setting
to choose the way you want to be notified when the video
feed fails.
You may set the DVR to Show Full Screen, Alarm Out, Buzzer and snapshot other
channels, if the video is failed to come to the DVR, like the camera is damaged.
Click Copy to copy the setting to other channels and then Apply.
Main Menu
In the
Motion Menu
, you may set the motion detection features for
each channel. This will save a lot of hard drive space and save you time
reviewing playbacks.
NOTE
: Motion recording is enabled by default.
Motion Menu
1.
Motion
In the
Motion
page, choose the channel to setup motion detection. You may
change the
Sensitivity
between
0-7, lowest to highest.
If the Motion and Buzzer are Enable, the DVR will record, and the buzzer will
beep when motion detected.
The area covered by yellow grid will detect and notify you when motion is
triggered. If you don’t want a specific area to be detected, please “erase” the
area by left clicking and dragging the mouse over the area to exclude.
Click
Copy
to copy the setting to other channels and then click
Apply
.
