Tiger SABER BOOM JD6145-55M/R T4F, Монтаж и эксплуатация

Страница: 121 / 266

MAINTENANCE
Saber Maintenance Section 4-15
©2019 Alamo Group Inc.
MAINTENANCE
BALL VALVES
The ball valve at the hydraulic reservoir may need
to be closed during certain maintenance or repair
procedures.
THE BALL VALVES MUST BE OPEN
(handle parallel with valve) WHEN TRACTOR IS
RE-STARTED OR PUMP IS COUPLED TO
MOTOR OR PTO!
Failure to do so will result in
component failure!
TIGHTENING KNIFE BOLTS AND DISK BOLTS:
BOOM ROTARY (SABER X3) - After every 8 hours
of operation or daily, the Knife Bolts and Disk Bolts
should be tightened as follows:
1-1/8” knife mounting bolts (2 ea.) torque to 870 ft.
lbs. lubricated.
5/8” disk mounting bolts (6 ea.) torque to 180 ft lbs
lubricated with Loctite 271, 204 ft. lbs. dry.
d
SABER ROTARY - After every 8 hours of operation
or daily, the knife bolts and blade bar bolts should
be tightened as follows:
Knife mounting bolts (A): Torque to 2000 ft. lbs.,
lubricated.
3/4” blade bar mounting bolts (B): Torque to 315 ft.
lbs. lubed (Locktite® 271) or 357 ft. lbs. dry (plated
bolts).
BOOM ROTARY
SABER ROTARY