TIGA e-Park 220, Инструкция по эксплуатации

Страница: 27 / 48

EN - 5
•
Avoid working with wet grass, in the
rain and when there is a risk of a
thunderstorm, especially lightening.
•
Pay careful attention to uneven ground
(hills, dips), slopes, hidden hazards and
obstacles that could limit visibility.
•
Be very careful near ravines, ditches
or embankments. The machine could
overturn if a wheel slides over the
edge or if the earth gives way.
•
Pay careful attention while mowing and
during transfers, both on level ground and
on slopes, to ensure the machine does not
overturn and there is no loss of control.
The main reasons for loss of control are:
– Insuicient wheel grip.
– Excessive speed.
– Sharp changes of direction.
– Inadequate braking.
– Type of machine unsuitable for its task.
– Lack of awareness of the efect
of ground conditions.
– Incorrect use as a towing machine.
•
Be careful of traic when operating
the machine close to public roads.
Behaviour
•
When working behind the wheel, do
not become distracted and maintain
the required level of concentration.
•
Exercise caution when reversing or
moving backwards. Look behind you to
make sure there are no obstacles before
and during operations in reverse gear.
•
Use care when pulling loads or
using heavy equipment:
– Use approved draw-bar hitch
points only when towing;
– Limit loads to those that can
be handled safely;
– Do not turn sharply. Take
care when reversing;
– Use counterweight(s) or wheel weights
whenever advised in the owner's manual.
•
Pay careful attention when using the
attachments that can alter the stability
of the machine, especially on slopes.
•
Always keep hands and feet away
from the cutting device, when starting
and when using the machine.
•
Keep your hands and feet away from the
articulated joint of the steering and the seat
support. There is the risk of crushing.
•
Attention: the cutting means will continue to
rotate for a few seconds after disengagement
or after you have switched of the motor.
•
Pay attention to cutting device
assembly with more than one cutting
mean, as rotating cutting device can
trigger the rotation of the others.
•
Do not touch the machine parts which
heat up during use. Burns hazard.
•
If something breaks or an accident
occurs during work, turn of the engine
immediately and move the machine away
to prevent further damage; if an accident
occurs with injuries or third parties are
injured, carry out the irst aid measures
most suitable for the situation immediately
and contact the medical authorities for any
necessary health care. Carefully remove
any debris which could cause damage or
injury to persons or animals if ignored.
Use limitations
•
Never use the machine if the guards are
damaged, missing or incorrectly positioned.
•
Don’t use the machine if the attachments/
tools are not installed in their seats.
•
When using the attachments, never direct
the machine towards other persons.
•
Never disengage, deactivate, remove
or tamper with the safety systems/
micro-switches installed.
•
The machine has not been approved
for use on public roads. It must be used
(as indicated by the highway code)
in private areas closed to traic.
3.4 MAINTENANCE, STORAGE
Ensure regular maintenance and correct
storage to maintain machine safety
and high performance levels.
Maintenance
•
Never use the machine with worn or
damaged parts. Faulty or worn-out parts must
always be replaced and never repaired.
•
Be careful during adjustment of the
machine to prevent entrapment of the
ingers between moving parts of the cutting
device and ixed parts of the machine.
•
The noise and vibration levels shown in
these instructions are the maximum levels for
use of the machine. The use of an unbalanced
cutting device, the excessive speed of
movement, or the absence of maintenance
have a signiicant inluence on noise
emissions and vibrations. Consequently,
it is necessary to take preventive steps to
eliminate possible damage due to high levels
of noise and stress from vibration; maintain
the machine well, wear ear protection
devices, and take breaks while working.
Storage
•
To reduce ire risks, do not leave
containers with debris inside a room.