TIE DOWN
Safety Products Division
800-241-1806 • 404-344-0000 • www.tiedown.com
Page 4 of 8
Caster Installation
Caster Bracket Assembly
Loosely install brackets onto
the casters with the nuts, bolts
and washers provided. Follow
assembly shown on the right.
Do not tighten.
Caster to Juggernaut Assembly
Locate the 2 square mounting holes on the
each side near the end of the cart. Align
brackets with the square mounting holes.
Install onto the frame as shown right using
the carriage bolts and nuts provided.
Tighten the carriage bolts and nuts attached
to the frame. Next tighten the 4 nuts and
bolts for the caster/bracket.
Rotating
Caster Wheels
Fixed
Caster Wheels
Caster Wheel Placement
It is recommended to use a forklift and rise the
Juggernaut cart off the ground about two feet.
The Juggernaut Cart is equipped with two sets of
casters, rotating and fixed.
Before assembling the casters to the Juggernaut
make sure the rotating casters are on both
positioned on the same short end of the cart.
