6
TIE DOWN
Safety Products Division
800-241-1806 • 404-344-0000 • www.tiedown.com
E1847, Rev. 9/24/21
Connecting to the Penetrator X3
DO NOT hook Personal Fall Arrest System (PFAS) to any point except a Fall Arrest or Fall Restraint
Tie-off Anchor Point.
When making connections, only use double-locking snap hooks and double-locking carabiners with this
equipment. Only use connectors that are suitable to each application. Ensure all connections are compatible
in size, shape and strength. Do not use equipment that is not compatible. Ensure that all connectors are fully
closed and locked.
The Fall Restraint Tie-Off
Two Fall Restraint Anchor tie off’s are located on the top corners of the Penetrator X3 where labeled. The Fall
Restraint tie off’s DO NOT arrest falls. The user must insure that the Fall Restraint worker is personally equipped
with lanyards, harnesses, safety lines, etc., when working in conjunction with potential fall arrest workers.
Do not attached fall restraints to the hoisting ring locations.
Do Not allow the fall restraint users to work close to any roof edge.
FALL ARREST TIE-OFF
The three Fall Arrest Tie Off points are located on the lower side of the Penetrator X3 in bright red, under of the
stay clear guard. The user must insure that the lanyards and harness are properly attached.
IMPORTANT: DO NOT allow workers to cross paths (cross lines) at anytime! Fall Restraint/Fall Arrest
lines must never cross over each other. Crossed lines will cause the unit to not function as intended.
Failure to maintain clear lines may cause a accident or death.
DO NOT OPERATE DAMAGED EQUIPMENT. DO NOT OPERATE EQUIPMENT THAT HAS BEEN MODIFIED.
(Please use the Inspection and Maintenance Log contained within the instructions manual )
Fall Arrest
Connection Points
Hoisting Point
Fall Restraint
Connection Point
Hoisting Point
Fall Restraint
Connection Point
