TIE DOWN 72810 Скачать руководство пользователя страница 3

3

TIE DOWN 

Safety Products Division

800-241-1806   •   404-344-0000  •  www.tiedown.com

E1847, Rev.  9/24/21

When set up properly the Penetrator X3 allows for two workers to be tied off for fall arrest using the specially 
designed fall arrest connection mechanism with two individual attachment points. An additional two workers 
can be tied-off for fall restraint at the specified attachment points.

Fall Restraint System

 – A fall restraint system (FRS) prevents the user from falling. The system is comprised of 

a body harness along with an anchorage, connectors and other equipment. The components typically include a 
lanyard and also may include a lifeline and other devices. The Penetrator X3 can be used as an anchorage in a 
fall restraint system for up to two workers.

Personal Fall Arrest System

 – A personal fall arrest system (PFAS) arrests a fall after a fall incident has

occurred. The system is comprised of an anchor point, connecting device, body harness, connectors, and a body 
harness and must include a deceleration system, or suitable combinations. Note that a PFAS does NOT prevent 
a fall from occurring. The Penetrator X3 can be used as an anchorage in a PFAS for up to two workers. A Personal 
Fall Arrest System must meet the following OSHA requirements:
 

•  Limit maximum arresting force on an employee to 1,800 pounds when used with a body harness;

 

•  Be rigged (lifeline plus deceleration device) so that an employee can neither free-fall more than 6 feet  

 

 

(1.8 meters) nor contact any lower level;

 

•  Bring an employee to a complete stop and limit maximum deceleration distance an employee travels  

 

 

to OSHA 3.5 feet (1.07 meters); and 4 ft. per ANSI 359.

 

•  Have sufficient strength to withstand twice the potential impact energy of an employee free-falling a  

 

 

distance of 6 feet (1.8 meters) or the free-fall distance permitted by the system, whichever is less.

Anchorage

 — An anchorage is a secure point of attachment for lifelines, lanyards, or deceleration devices. The 

Penetrator X3 is a mobile anchorage.

Penetrator X3 Use - 

Flat surfaces to slopes up to 1:12.

800-241-1806   •   404-344-0000  •  www.tiedown.com

Applications

Содержание 72810

















Отзывы: