manualshive.com logo in svg

Thytronic Pro-N NVA100X-D, Руководство пользователя

Поделиться
Скачать
Thytronic Pro-N NVA100X-D Скачать руководство пользователя страница 155

FUNCTION CHARACTERISTICS

155

NVA100X-D - Manual - 02 - 2016

Second harmonic restraint

For all overcurrent elements, a block from the second harmonic restraint may be set by setting 

ON

 the 

IE1>2ndh-REST, IE1>>2ndh-REST, IE1>>>2ndh-REST

 parameters inside the 

Set \ Profi le 

A(or B) \ Residual overcurrent-50N.1/51N.1 \

 

IE1> Element

  (

IE1>> Element

, 

IE1>>> Element) \ Set-

points 

menus.

Cold load pickup

If the CLP function (Cold Load Pick-up) is enabled for element blocking, the selected threshold may 
be blocked for an adjustable time interval, starting from the circuit breaker closure.

This operating mode may be select by setting 

ON-Element blocking 

the 

IE1CLP> Mode, 

IE1CLP>> Mode, IE1CLP>>> Mode

 parameters.

If the CLP function (Cold Load Pick-up) is enabled for threshold change, the selected threshold may 
be changed for an adjustable time interval, starting from the circuit breaker closure.

This operating mode (

ON-Change setting =

 

IE1CLP> Mode, IE1CLP>> Mode, IE1CLP>>> 

Mode

) and the concerning operating time within the CLP (

tE1CLP>, tE1CLP>>, tE1CLP>>>

) 

may be adjusted inside the 

Set \ Profi le A(or B) \ Residual overcurrent-50N.1/51N.1 \

 

IE> Element

 

(

IE1>> Element

, 

IE1>>> Element) \ Setpoints menus

, whereas the operating thresholds within the 

CLP  ( 

IE1CLP>def, IE1CLP>inv,....

) may be adjusted inside the

 

Set \ Profi le A(or B) \ Residual 

overcurrent-50N.1/51N.1 \

 

IE1> Element

  (

IE1>> Element

, 

IE1>>> Element) \ Defi nite time (Inverse 

time) 

menus.

For every of the four thresholds the following block criteria are available:

Logical block (Block1)

If the 

IE1>BLK1, IE1>>BLK1 

and/or

 IE1>>>BLK1

 enabling parameters are set to 

ON

 and a 

binary input is designed for logical block (Block1), the concerning element is blocked off whenever 
the given input is active.

[1]

 The enabling parameters are available inside the  

Set \ Profi le A(or B) \ Re-

sidual overcurrent-50N.1/51N.1 \

 

IE1> Element

 (

IE1>> Element

, 

IE1>>> Element) \ Setpoints 

menus, 

while  the 

Block1 

function must be assigned to the selected binary input inside the 

Set \ Board1(2) 

inputs \ Binary input IN1-1...INx-x)

 menus.

Selective block (Block2)

All along the protective elements the selective block may be set.

The logic selectivity function may be performed by means any combination of the following I/O:

One committed pilot wire input (BLIN1).
One or more binary inputs designed for input selective block.
One committed pilot wire output (BLOUT1).
One or more output relays designed for output selective block.

Only when the committed pilot wire are used the continuity check of the pilot wire link is active

Use of committed pilot wire input BLIN1:

The protection is blocked off according the selectivity block criteria when the input BLIN1 is active. 
The information about phase or phase+earth block may be select programming the 

ModeBLIN1

 

parameter inside the 

Set \ Profi le A(or B) \ Selective block-BLOCK2 \ Selective block IN

 menus.

Use of binary inputs:

If the 

IE1>BLK2IN, IE1>>BLK2IN 

and/or

 IE1>>>BLK2IN

 parameters are set to 

ON

 and 

a binary input is designed for selective block (Block2), the protection is blocked off by phase ele-

ments (Block2 Iph) or by any protection element (Block2 Iph/IE) according the selectivity block 

criteria.

[2]

 The enable 

IE1>BLK2IN, IE1>>BLK2IN 

and/or

 IE1>>>BLK2IN 

parameters are 

available inside the 

Set \ Profi le A(or B) \ Residual overcurrent-50N.1/51N.1 \

 

IE1> Element

 (

IE1>> 

Element

, 

IE1>>> Element) \ Setpoints 

menus, while the 

Block2 Iph 

and

 Block2 Iph/IE

 functions 

must be assigned to the selected binary inputs inside the 

Set \ Board1(2) inputs \ Binary input IN1-

1...INx-x)

 menus.

Use of committed pilot wire output BLOUT1:

The information about phase or phase+earth block may be select programming the 

ModeBLOUT1

 

parameter (

OFF - ON IPh - ON IPh/IE - ON IE

) inside 

Set \ Profi le A(or B) \ Selective block-

BLOCK2 \ Selective block OUT

 menus.

Use of output relay:

If the 

IE1>BLK2OUT, IE1>>BLK2OUT 

and/or

 IE1>>>BLK2OUT

 enable parameters are 

set to 

ON

 and a output relay is designed for selective block (Block2), the protection issues a 

block output by phase elements (BLK2OUT-Iph) or by any protection element (BLK2OUT-Iph/IE), 
whenever the given element (Start IE>, Start IE>>and/or Start IE>>>) becomes active. The enable 

IE1>BLK2OUT, IE1>>BLK2OUT, 

and/or

 IE1>>>BLK2OUT 

parameters (

ON

 or 

OFF

) are 

available inside the 

Set \ Profi le A(or B) \ Residual overcurrent-50N.1/51N.1 \

 

IE1> Element

 (

IE1>> 

Element

, 

IE1>>> Element) \ Setpoints 

menus, while the 

BLK2OUT-Iph-K, BLK2OUT-Iph/IE-

K 

and/or 

BLK2OUT-IE-K 

output relays and LEDs (

BLK2OUT-Iph-L, BLK2OUT-Iph/IE-L 

e/o 

BLK2OUT-IE-L

) must be select inside the 

Set \ Profi le A(or B) \ Selective block-BLOCK2 \ Selec-

tive block OUT

 menu.

Note 1  The description of the logical block (Block 1) function may be found in the “Logic Block” paragraph inside 

CONTROL AND MONITORING 

section 

Note 2  The exhaustive treatment of the selective block (Block 2) function may be found in the “Selective Block” paragraph inside 

CONTROL AND 

MONITORING 

section 

•
•
•
•

•

•

•

•

Содержание Pro-N NVA100X-D

























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды