Thuraya
ㅣ
9
www
.thuraya.com
Switching from SG-2520 to SO-2510
If you want to use SO-2510 instead of SG-2520, you must follow the procedure
below to change the position of the docking area:
1. Release the fixing screw using Coin from the fixing hole of the docking
area located on the bottom of FDU-3500.
2. Place FDU-3500 in the correct orientation and then press the lower part of
the docking area slightly. Keep pushing it upward until it won’t move anymore.
3. Fasten the fixing screw using Coin again.
1. Release the fixing screw using Coin from the fixing hole of the docking area
located on the bottom of FDU-3500.
2. Place FDU-3500 in the correct orientation and then press the upper part of
the docking area slightly. Keep pushing it downward until it won’t move
anymore.
3. Fasten the fixing screw using Coin again.
When FDU-3500 is released by the manufacturer, its docking area is set for SO-
2510. If you want to use SG-2520, you must follow the procedure below to
change the position of the docking area.
Please be careful as the product may get damaged or broken if you use excessive force on it.
Note
Switching from SO-2510 to SG-2520
Содержание FDU-3500
Страница 1: ...FDU 3500 USER GUIDE...
Страница 32: ......