20
ㅣ
Thuraya
7.1.1. Receiving Data Calls
The PC should be connected to FDU-3500 through USB or DTE interface.
To receive a data call on the PC appropriate data communication software should
be running, e.g. Hyper handset (default program available on Windows OS).
1. Dock Thuraya handset in FDU-3500.
2. Connect PC through USB or DTE interface.
3. Switch ON FDU-3500.
4. Invoke the data communication software.
5. You will hear a special signal tone in Thuraya handset when a data call is
coming through.
6. The data will be received by the communication software (Look up the S/W
guide book for the specific explanation).
7.1.2. Sending Data from PC
1. Dock Thuraya handset in FDU-3500.
2. Switch ON FDU-3500.
3. Invoke the data communication software in your PC.
4. Dial the destination number (e.g. ATDT 12345678)
5. Select the data file to be sent after call connection.
6. Use appropriate options in the data communication software to send the file
now. (Look up the S/W guide book for the specific explanation.)
7. Receiving/Sending Data Calls
You can use FDU-3500 to receive and make data calls. You can do this through a
PC connected at the USB or DTE interface. To receive/make data calls by a PC,
appropriate data communication software should be installed on the PC.
The baud rate of PC data communication software should be set up at 19200bps (Baud rate
of PC data communication software should be set to 19200bps both in sender and recipient’s
PC).
Note
Содержание FDU-3500
Страница 1: ...FDU 3500 USER GUIDE...
Страница 32: ......